Skip to content

Top 8 Best intake manifold for tbi 350 Reviews & Buying Guide

Our selection of the top intake manifold for tbi 350 includes only the highest-quality and most effective products available on the market. This pair of intake manifold for tbi 350 was selected for you because of their inherent worth to your life as well as their demonstrated track record of creating great outcomes for people who utilize them. We have extensively examined each of them and determined their usefulness in terms of their features, pricing, and overall effectiveness. So, if you’re still undecided about which intake manifold for tbi 350 to purchase, don’t hesitate to go over our Top 8 Selections.

Comparison Table of Our 5 Top intake manifold for tbi 350 Picks

Our Top 8 Best intake manifold for tbi 350 Reviews

Bestseller No. 1
Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable
  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350.
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments.
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter.
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit (Studs, nuts, and washers.) , 1 X Manual.
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks.
Bestseller No. 2
Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable
  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs.
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage.
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response.
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual.
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks.
Bestseller No. 3
Speedmaster 1-147-035 Fits Chevy SBC 350 HiRise Vortec Intake Manifold Machine Polished
  • 147 Intake Manifold, Carbureted
  • Speedmaster creates unique & distinctive DNA items inspired by the blend of old and new technology. Its empowered work forced drives innovation not only in the products it sells but with the way it goes about doing it.
  • TRACK PROVEN - Surviving the longevity of road, race and recreation is mandatory for all “Track Proven†products, Bringing you closer to product perfection.
Bestseller No. 4
NICECNC Intake Manifold Adapter for 1.75 TBI Throttle Body to Holley 4412 2300 Compatible with Chevrolet Fits 2 Barrel Manifold 500 350 CFM For Holleys and Early Autolite Carbs
  • Works with 2 barrel 350 and 500 CFM For Holleys and early autolite carbs.
  • Make from a duarable heat resistant composite automotive approved material gas and alcohol proof won't chip crack or stain. ( You would have to use an Axe to damage this material)
  • Acts as an insulator to prevent the gas from boiling (Vapor lock) and keep the carb cooler for more power.
  • CNC machined from high quality POM material. Adds tuned length for more TQ (Torque).
  • The bores are tapered to adapt the narrow 2bl spacing to the wider TBI pattern without hurting performance and airflow.
Bestseller No. 5
TYFYB Aluminum Satin Intake Manifold For Small Block Chevy SBC 305 327 350 400 1957-1986 1500-6500 RPM
  • Intake gaskets with 1.23" wide x 1.99" tall port holes;Material:Aluminum;Bolt Hole Pattern:5.160" x 5.625";
  • Carburetor Flange Type:4-Barrel Square Bore;Power range is 1500-6500 RPM
  • Aluminum intake is a dual plane, 180° street manifold designed to be used with Holley, Carter AFB or Edelbrock square flange carbs.
  • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
  • Fitment:Fits 1957-86 SBC Chevy engine applications.
Bestseller No. 6
Z Whip SBC INTAKE MANIFOLD BOLT KIT HIGH STRENGTH ZINC COATED 3/8-16 BOLTS Compatible with Chevrolet V8 Small Blocks 265 283 305 327 350 383 400 1955-1995 Gen I heads
  • Compatible with all Chevy Small Block Oem and Most Aftermarket Intake Manifolds 265 283 305 307 327 350 383 400
  • These are High Grade Zinc Coated Flange Bolts for Extra Clamping Force
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
  • Includes 12ea bolts.
Bestseller No. 7
JEGS Intake Manifold for Small Block Chevy 1955-1986 - Non-EGR Design - Idle - 5500 RPM Power Range - Cast Aluminum - Square Bore Carburetor Mounting Pad
  • Improve engine performance and horsepower with this higher flowing intake manifold compared to a stock cast iron intake.
  • Designed to fit with popular aftermarket square bore 4150 carburetors including Edelbrock, Holley, Quickfuel, Proform, and more!
  • Idle to 5500 RPM power band for street or mild race applications.
  • Fits GM and Chevrolet cylinder heads from 1955 through 1986.
  • Fabricated from cast aluminum for weight savings and improved performance.
Bestseller No. 8
Edelbrock 2701 Performer Intake Manifold
  • Made of aluminum with a natural finish
  • Dual plane intake style
  • RPM range is idle to 5, 500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck

Our Top 8 Best intake manifold for tbi 350 Reviews

Before you purchase in any intake manifold for tbi 350, it’s critical to understand the characteristics you should seek. Consider the following while selecting the best intake manifold for tbi 350:

1) Economical

Whichever intake manifold for tbi 350 you select, you’re certain to receive a good deal. All of the goods on this list are reasonably priced without losing efficacy or quality.

2) A Wide Selection Of intake manifold for tbi 350

Whatever your objective, it’s critical to have a choice of different intake manifold for tbi 350 on hand. By picking from this list, you may find the ideal solution for your specific requirements.

3) Simple To Use:

Check to see if the intake manifold for tbi 350 are simple to use. If it is not simple to utilize, you will be overwhelmed in a genuine field or common area. Therefore, determine whether the intake manifold for tbi 350 are simple to use or not.

4) Efficacy

All of the best intake manifold for tbi 350 on this list deliver actual results, so choose wisely. I’ve provided extensive evaluations for each product to determine its efficacy.

5) Build Quality:

You’re probably not interested in intake manifold for tbi 350 that shatter or fracture after a few uses. Always inspect the product’s construction and ask yourself if it can endure repeated usage and abuse.

Leave a Reply

Your email address will not be published.