Skip to content

Best cam for 4.8 [Top 10 Picks]

  • by

Our list of the best cam for 4.8 contains only the finest and most efficacious items on the market. We have chosen these cam for 4.8 based on their intrinsic value to your life, as well as their proven track record in producing positive results for those who use them. We have tested each of them thoroughly and checked their efficacy in terms of their feature, price, and effectiveness. So, if you’re confused which cam for 4.8 to buy, without any hesitation Check out our Top 10 Picks.

Check Our Top 9 cam for 4.8 Picks

Best cam for 4.8 Reviews

Bestseller No. 1
Texas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0,Includes GM LS6 Single Beehive Valve Springs, Set of 16 and Gasket Set Kit (Camshaft, Springs and Gasket Kit)
  • Texas Speed Stage 3 Low Lift 216/220, .550"/.550" Camshaft 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). Beehive Valve Springs, Set of 16 Hat Seals. and Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal. These camshafts have a 3-bolt timing gear pattern.
  • This cam gained 53.4 HP and 22.0 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market!
  • 1400-6000 RPM Power Band; This is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
  • These cams are designed specifically for 4.8 5.3 6.0 combinations.
Bestseller No. 2
Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Valve Seals
  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Valve Seals
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and LS Hat Seals
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage.
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111
Bestseller No. 3
Texas Speed TSP Torquer V2 232/234 .600"/.600" Camshaft 112 LSA 4.8 5.3 5.7 6.0 LS Engines. Includes Springs, Pushrods and Gasket Kit (Camshaft, Springs and Gasket Kit)
  • Texas Speed TSP Torquer V2 232/234 .600"/.600" Camshaft 112 LSA Includes Springs, Pushrods and Gasket Kit
  • Includes .660" Dual Spring Kit w/ Integrated One-Piece Seat & Seal, Titanium Retainers, PAC Springs, 7.400" Chromoly Pushrods and Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal.
  • The Torquer V2 camshaft is a very popular camshaft for customers wanting a big power camshaft that makes big power gains while still having the option of running a beehive valve spring. The 112LSA helps to bring the camshaft's powerband lower in the RPM band. The lower LSA also creates a slightly rougher idle. The Torquer V2 camshaft is a very popular camshaft for customers wanting a big power camshaft that makes big power gains while still having the option of running a beehive valve spring.
  • Dyno testing has shown the Torquer V2 camshaft to make a solid 50-55 RWHP gains! With the Torquer V2 camshaft, we typically recommend the customer have at least a 3,000 RPM stall speed torque converter for automatic cars.
  • Tuning will also be required in both automatic & manual applications.
Bestseller No. 4
Brian Tooley BTR Stage 2 Truck Camshaft Springs, Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Spring Set and Gasket Kit)
  • Brian Tooley 2 BTR Stage 2 Truck Cam V2 212/218 .553"/.553" 111 99-13 GM Truck Applications Beehive Springs and Cam Install Gasket Kit
  • Camshaft, Beehive Springs, Seals, Crank Bolt, Gaskets for Water Pump, Timing Cover, & Front Seal. These camshafts have a 3-bolt From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs.
  • From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs. We have partnered with an OEM Tier 1 supplier to grind the new V2 series. The end result is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment.
  • The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size. As opposed to grinding all the camshafts from the same starting core, they each have their own respective core to begin.
  • The Stage 2 grind is a great middle-ground for people looking for added power, while keeping OEM driving characteristics in check. OEM torque converters play happily with these grinds. If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series.
Bestseller No. 5
Brian Tooley BTR Truck Norris Camshaft for Gen 3/4 LS 4.8 5.3 5.7 6.0 6.2 LS1 Vortec (Cam, Springs, Seals, Pushrods, Install Gasket)
  • BTR Brian Tooley TRUCK NORRIS Camshaft For 1999-2013 GM Gen3/4 LS Truck Engines 4.8, 5.3, 6.0, 6.2
  • Specs: 212/22X .552"/.552" 107 LSA 3 Bolt Pattern
  • The Truck Norris will deliver a roundhouse kick in the pants to your 1999-2013 GM V8 Truck or SUV! Developed from hundreds of hours of in-house cam lobe design and dyno testing, this camshaft has more power and torque everywhere in the curve compared to BTR's legendary V2 truck cams. It has an idle sound similar to more aggressive truck camshafts, yet will behave well with stock torque converters.
  • VVT engines will require a VVT delete kit. If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required. MAKE IT A KIT!
  • Our kit options take the guesswork out and include the following: Camshaft only: BTR Truck Norris Camshaft by itself. Camshaft, Springs and Hat Seals: BTR Truck Norris Cam, high quality beehive springs, OEM style hat valve seals. Camshaft, Springs, Hat Seals and Pushrods: BTR Truck Norris Cam, beehive springs, hat seals and 7.400" long, 5/16" Chromoly Pushrods with .080" wall thickness. Gasket kit: Includes Timing cover gasket, water pump gaskets, front crankshaft seal and new damper bolt
Bestseller No. 6
Brian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2
  • Brian Tooley Racing BTR Stage 3 Truck Cam, Beehive Springs and 7.400" Chromoly Pushrods 4.8 5.3 6.0
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 Chromoly Pushrods
  • Stage III Camshaft Specs Specs: 218/224 .553/.553 110+0 Requires a 3 bolt timing gear.
  • STAGE 3 SPECIFICS: The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance.
Bestseller No. 7
Brian Tooley BTR Stage 3 Truck Camshaft Beehive Springs Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Springs, Seals, Gaskets, Pushrods)
  • Brian Tooley Racing BTR Truck Stage 3 Cam Kit 4.8 5.3 6.0 The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Racing Springs Beehive Valve Spring and Set of Chromoly Pushrods of VS LS Hat Seals, 7.400" Chromoly Pushrods Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal
  • Specs are 218/224 .553/.553 113+3
  • These Vortec Truck cams require a 3-bolt timing gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
  • The Stage III cam has a noticeable cam sound that so many are looking for. It will make even more average torque than the Stage II cam, at the sacrifice of some low end torque and fuel mileage.
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. Specs are 218/224 .553/.553 113+3
Bestseller No. 8
Texas Speed TSP 224R 224/224 .600"/.600" Camshaft, Spring Kit, and Chromoly Pushrods, 4.8 5.3 5.7 6.0 LS (Camshaft and Spring Kit)
  • Texas Speed TSP 224R 224/224 .600"/.600" Camshaft, Spring Kit, and Chromoly Pushrods 4.8 5.3 5.7 6.0 LS LS1
  • Includes TSP .660" Dual Spring Kit w/ PAC Racing Polished Springs, Titanium Retainers, Hardened Spring Seats, and New Valve Stem Seals, and 7.400 Chromoly Pushrods
  • The 112LSA helps to bring the camshafts powerband lower in the rpm band. The lower LSA also creates a slightly rougher idle.
  • The 224R camshaft is without a doubt one of the most popular camshafts we offer for the LS1 engines.
  • It has awesome drive-ability while making a solid 40+ rear wheel horsepower gains! For customers looking for a smaller camshaft that packs a big punch, the 224R camshaft is pretty hard to beat!
Bestseller No. 9
Texas Speed TSP 228R 228/228 .600"/.600" Camshaft, Spring Kit, Chromoly Pushrods, and Gasket Set. 4.8 5.3 5.7 6.0 LS Cam (Camshaft, Spring Kit, and Gasket Set)
  • Texas Speed TSP 228R 228/228 .600"/.600" 112 LSA Camshaft 4.8 5.3 5.7 6.0 LS Cam
  • Includes TSP .660" Dual Spring Kit w/ PAC Racing Polished Springs, Titanium Retainers, Hardened Spring Seats, and New Valve Stem Seals, Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal
  • The 112LSA helps to bring the camshafts powerband lower in the rpm band. The lower LSA also creates a slightly rougher idle.
  • The 228R camshaft is a very popular camshaft for customers wanting a very streetable camshaft that makes approximately 5-7 more horsepower than the 224R camshaft.
  • Dyno testing has shown the 228R camshaft to make a solid 45-50rwhp gains. The 228R camshaft is large enough that we recommend a larger than stock stall converter in automatic cars. Tuning will also be required in both automatic & manual applications.
Bestseller No. 10
Teilelager Vortec Truck Stage 2 Camshaft and Spring Kit 4.8L 5.3L 6.0L Includes Beehive Springs and Valve Seals
  • The Stage 2 cam a great middle-ground for people looking for added power, while keeping driving characteristics in check. Torque converters play happily with these grinds.
  • If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series.
  • LS-series Valve Springs are designed, manufactured and tested to keep the correct seat and open pressures on the intake and exhaust valves for a variety of cylinder head applications. Handles valve train stress more efficiently to lessen chances of damage at high RPM's. Our products are designed to service and replace original components to maintain the performance and reliability of your vehicle!
  • Specs are 218/224 .553/.553 110+0.These Vortec Truck cams require a 3-bolt timing gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used.
  • We provide a 12-month warranty, any quality issues, please contact us. We will replace you with new accessories in person.

Best cam for 4.8 Reviews

Before purchasing any cam for 4.8, it is critical to first understand what characteristics you should be searching for. Here are a few things to consider while looking for the finest cam for 4.8:

5) Efficiency

All of the top cam for 4.8 on our list give consumers measurable outcomes, so make sure you select one that will produce the greatest potential result. I’ve provided extensive reviews to assess the usefulness of each product.

4) Cost-effective

Whatever cam for 4.8 you pick, you’ll receive good value for your money. All of the items on this list are reasonably priced without losing quality or efficacy.

3) A Wide Range of cam for 4.8

Whatever your objective, it’s critical to have access to a range of cam for 4.8. You’ll be able to locate the ideal solution for your specific needs by picking from this selection.

2) Simple to Use:

Check to see if the cam for 4.8 are simple to use. If something is difficult to utilize, you will be overwhelmed in the field or in a public location. So consider whether or not the cam for 4.8 are simple to use.

1) Build Quality:

You probably don’t want cam for 4.8 that shatter or fracture after a few uses. Before purchasing a product, carefully inspect its construction and ask yourself if it will resist heavy usage and abuse.

Leave a Reply

Your email address will not be published.